Spray Foam Insulation TorontoWelcome to Toronto Spray Foam Insulation. It's an absolute pleasure of ours to introduce our Toronto neighbors to this incredible eco-friendly technology. Over the years, we have served and are still serving Toronto homes, small and large-scale businesses with efficient and quality insulation products and services.
We, as insulation contractors in Toronto, are keen on providing you with everything you need to know about spray foam insulation. Our specialty is the installation of durable and efficient moisture-proof spray foam insulation in commercial spaces, homes and other structures.
|
|
Is spray foam insulation a good choice for you?
|
|
About Spray Foam InsulationSpray foam insulation is a fluid insulation that is diffused and set into insulating layers. It is used to insulate walls, roofs, rooms, floors and so on. Spray foam insulation has been around for a long period of time now and has proved to be the solution to air leakages.
Depending on your need and budget, we as Toronto spray foam insulation contractors will introduce you to two types of spray foam insulation to pick from. The first is closed-cell spray foam, while the other is open-cell spray foam. Both open and closed cell spray foam consist of polyurethane, loaded with blisters of air and gas, however, with varying attributes when they set. Closed-cell spray foam insulation are adjusted into a rigid mass that can help reinforce your buildings. One of the unique features of this closed-cell insulation is that it reduces the rate of penetration of heat through it. On the other hand, open-cell spray foam insulation is compressible, therefore, it can't be used to support structural edifices like the closed-cell spray foam insulation. Open-cell spray foam insulation is often used to reduce and block sounds and airflow but, moisture can flow through it. |
|
Benefits of Spray Foam InsulationSpray foam insulation, no doubt, has a whole lot of benefits it can offer. From our experience at the Toronto spray foam insulation, we will be looking at different benefits of installing spray foam insulation in your homes and offices.
There is no denial that spray foam insulation is better than old insulation materials because of its efficiency and effectiveness. Secondly, spray foam is capable of reducing and saving your energy use by up to 55%. Thirdly, spray foam insulation seals air leakages, thus, maintaining room temperature. Fourthly, It reduces noise coming from outside, bringing about the desired serenity to your home. Furthermore, with spray foam insulation installed in your building, the worth of your property increases, in case of a resale. Lastly, spray foam insulation prevents dust, and allergens from entering your home to harm your health. |
|
Where to Use Spray Foam Insulation
Spray foam insulation can be used in just about any part of your buildings. Spray foam insulation helps create thermal and air barriers for your buildings so as, Toronto spray foam insulation contractors, we will be highlighting the best parts of your homes, offices and other buildings where insulation can prove to be efficient.
You should consider a spray foam insulation around your window for an excellent air barrier. Spray foam insulation in Toronto can be used for ventilation, heating, air-conditioning purposes and to facilitate the functions of cooling and heating systems in your homes and offices. It can also be used to seal walls, roofs, pipes, plumbing, cracks and penetrations. Spray foam can as well be used for exterior purposes like stone wall repair, wall joint, electrical and gas penetrations, and so on.
You should consider a spray foam insulation around your window for an excellent air barrier. Spray foam insulation in Toronto can be used for ventilation, heating, air-conditioning purposes and to facilitate the functions of cooling and heating systems in your homes and offices. It can also be used to seal walls, roofs, pipes, plumbing, cracks and penetrations. Spray foam can as well be used for exterior purposes like stone wall repair, wall joint, electrical and gas penetrations, and so on.
|
Why Hire Us?As Toronto spray foam Insulation contractors, we are equipped with the necessary tools, experience and professionals to help you determine the right insulation needed for your building. Installing spray foam insulation requires a lot of experience, as it has lots of advantages over other kinds of insulation. Furthermore, it is essential to go for an installer who is meticulous, with good reputation and experience, which we have. Your building deserves the best!
|
Thinking about DIY spray foam insulation?Installing spray foam insulation can be a herculean task. This is one of the reasons you need to consult us at Toronto Spray Foam Insulation to help you with the installation process. The challenges that could be encountered while applying spray foam insulation include:
If the chemicals are not properly mixed, it may cause the foam to pull away from the surface. Another challenge is if the chemicals are not properly mixed, it may cause foul odor and health hazards. Also rushing the installation process may affect the quality of the outcome thus reducing the efficiency of the spray foam insulation. Additionally, if few variables like the thickness of the spray foam, and climate type of spray foam insulation to use are not put into consideration, you may experience undesirable challenges with your spray foam insulation. |
|
Toronto Spray Foam Insulation ContractorsWe pride ourselves as a foremost spray foam insulation installers in Toronto. We allow our reviews and results speak for us. One of the methods we employ in achieving our goal is to use the best kinds of insulation materials to eliminate the possibility of future problems with our work.
Are you planning to build a new home or renovate your existing structure? Toronto Spray Foam Insulation is the best choice. We interface directly with our clients from the beginning to the end of the installation process. We do so to ensure customer satisfaction. |
|
Spray Foam Insulation Can Save You Up to 50% on Energy Costs
|
A research has discovered that roughly 55% of energy consumed at home goes to heating and cooling and uncontrolled air leakage. Inferentially, this accounts for as much as 50% of the heating and cooling costs. The good news about this is that, by insulating your home, you can save costs in the long run— if the merits are considered.
Employing our services at Toronto Spray Foam Insulation will help you save on utility costs in the long run. In addition to saving costs, insulating your property can increase its value. Wall and soundproof insulations are features that can interest prospective buyers. Contact us today for insulation inspections and home energy audits. |
|
Types of Insulation for Homes and Commercial Buildings
Earlier, we mentioned that we use the best kinds of insulation depending on the building to be insulated, thus ensuring that our clients are maximally satisfied. Of the materials we use, here are some:
- Cellulose
- Mineral Wool
- Fiber glass
- Blown-In Insulation
- Wall Insulation
Cellulose Insulation
It is one of the oldest building materials, made from cotton, straw, sawdust, newspaper, cardboard, corncob and hemp. It is used on walls and roofs to reduce noise.
Mineral Wool Insulation
It is an expectational and very versatile material. It prevents the movement of air, which gives it the ability to reduce noise and promote safety by reducing the risk of fire.
Fiberglass Insulation
It is made of fine glass materials. An endearing feature of this insulation is that it reduces the spread of heat and cold, as well as reducing noise.
Why you shouldn't install Spray Foam Insulation yourself
Spray foam installation is an important structural element for any kind of building. People tend to see the installation process as a "do-it-yourself" one, but there are many variables to consider before undertaking the installation. An essential part of Insulation installation is maintaining the regular building temperature, maintaining the structural mold, sealing air leakages and so on. As part of the intricacies, selecting the appropriate insulation for the right purpose is another task. All these and more culminate in why installing any form of insulation yourself might not be the best idea.
It is our experience as insulation contractors that self-installation of spray foam insulation may put you in unsafe situations. To start with, it would take a professional's eye to know and recommend a befitting insulation that would go for your building, because buildings are different. Furthermore, there is a lot of things to worry about when choosing the type of insulation in the wide range of choices available. Therefore, in order not to buy low-grade insulation materials-that's providing you get the appropriate insulation type right-and do a shambolic job in the end by going DIY, why not leave the worrying and hassles to us by consulting us today at Toronto spray foam insulation contractors.
Blown-In-blanket insulation has features like that of rolls and blatts. This kind of insulation is administered with the aid of a machine that spreads the material in the appropriate spaces. Rigid foam or radiant barrier insulation is the most DIY friendly, which is ideal for floors, but still needs an expert's supervision.
Due to its energy-saving feature and low possibility of fire outbreak, fiberglass is a good insulator. However, fiberglass is made up of crumbs which can irritate the skin and eye when contacted. This and many other adverse health-related conditions are reasons you shouldn't go DIY.
Another reason is that installing any kind of insulation requires paying great attention to detail, the kind possessed by experts like us at Toronto spray foam insulation, because tiny details that may be missed by you would be picked by our trained personnels, thus achieving the desired results for your buildings.
Blown-In-blanket insulation has features like that of rolls and blatts. This kind of insulation is administered with the aid of a machine that spreads the material in the appropriate spaces. Rigid foam or radiant barrier insulation is the most DIY friendly, which is ideal for floors, but still needs an expert's supervision.
Due to its energy-saving feature and low possibility of fire outbreak, fiberglass is a good insulator. However, fiberglass is made up of crumbs which can irritate the skin and eye when contacted. This and many other adverse health-related conditions are reasons you shouldn't go DIY.
Another reason is that installing any kind of insulation requires paying great attention to detail, the kind possessed by experts like us at Toronto spray foam insulation, because tiny details that may be missed by you would be picked by our trained personnels, thus achieving the desired results for your buildings.
Best Spray Foam Kit
Having a spray foam kit handy can be the solution to sudden changes in the weather. This spray foam performs more than one function. It can act as an Insulator to both heat and cold temperatures and also be used to seal various openings in buildings, because of its expansile property.
Some of the best brands are:
Foam it Green: Foam IT 602 Class 1 Spray Foam Insulation Kit
This kit is such a good invention. It consists of several in-built features plus its excellent performance grading. This insulation works best in summer, as well as, in winter.
The innovation that comes with this kit enhances the functionalities of a building. It has a fire retardation feature that helps to prevent the spread of fire in case of an outbreak which makes containing and controlling the fire a much easier job.
Additionally, this foam contains an antimicrobial component that prevents the growth of microbes on the structure, thus creating a 'clean' surrounding and sustaining the health of individuals using the building.
Furthermore, this spray foam sprays evenly, which makes it comfortable for even first-time users. One other feature to consider about this kit is its potential to reduce electricity bills, as it maintains the temperature of the building and saves energy.
The innovation that comes with this kit enhances the functionalities of a building. It has a fire retardation feature that helps to prevent the spread of fire in case of an outbreak which makes containing and controlling the fire a much easier job.
Additionally, this foam contains an antimicrobial component that prevents the growth of microbes on the structure, thus creating a 'clean' surrounding and sustaining the health of individuals using the building.
Furthermore, this spray foam sprays evenly, which makes it comfortable for even first-time users. One other feature to consider about this kit is its potential to reduce electricity bills, as it maintains the temperature of the building and saves energy.
Dow Chemical Co Froth-Pak 12 (1.75 Pcf) Sealant
It is a very appealing and excellent device with great features. As a multipurpose spray, it can be used for various functions. An endearing feature of this device is that it has two compartments that store chemicals, making it easily carriable.
This spray foam can be used for many things, which includes filling the openings in walls, roofs, expansion cracks, joints, and penetrations. The consistent flow feature of this device makes it user-friendly.
Interestingly, once this device has blocked any cavity on the wall or roof, it tends to be permanent. The device consists of 4 fan spray nozzle, 9-feet gun horse, 6 cone spray nozzle, insta-flow dispensing gun and so on— all designed to make it highly efficient, while at the same time, maintaining high performance. As a high-performing device, it can be used for indoor and outdoor applications, plus other ancillary uses.
This spray foam can be used for many things, which includes filling the openings in walls, roofs, expansion cracks, joints, and penetrations. The consistent flow feature of this device makes it user-friendly.
Interestingly, once this device has blocked any cavity on the wall or roof, it tends to be permanent. The device consists of 4 fan spray nozzle, 9-feet gun horse, 6 cone spray nozzle, insta-flow dispensing gun and so on— all designed to make it highly efficient, while at the same time, maintaining high performance. As a high-performing device, it can be used for indoor and outdoor applications, plus other ancillary uses.
Touch n' Seal Foam Kit 15
This foam kit works well in extremes of environmental conditions. With the foam kit, you can seal and insulate. The sealing feature is particularly popular for its instant sealing, after application. With this, you can plaster various cavities, holes, and penetrations in your homes, offices and other places.
The spray kit dispensing gun is highly efficient, as it sprays foam effectively and quickly. Again, since it comes with two containers, the mixing can be made easy with the aid of the spray gun. The spray gun comes with an insulating property that allows heat in the house to spread. An additional endearing feature of this device is that it is eco-friendly, owing to its anti-microbial property that helps maintain hygiene in the house.
The lightweight container allows for easy mobility and portability.
The spray kit dispensing gun is highly efficient, as it sprays foam effectively and quickly. Again, since it comes with two containers, the mixing can be made easy with the aid of the spray gun. The spray gun comes with an insulating property that allows heat in the house to spread. An additional endearing feature of this device is that it is eco-friendly, owing to its anti-microbial property that helps maintain hygiene in the house.
The lightweight container allows for easy mobility and portability.
Fomo product Inc: Foam Spray Foam Insulation
This is a multifunctional spray foam, which can be used to seal and insulate. Not only is it a multipurpose spray, it is loaded with other interesting features that make it very efficient and effective.
Various sizes of openings in the house can be sealed with this foam. The sealing prevents penetration of air thus, creating an effective air barrier. It also helps keep insects and rodents away from the building.
This also has antimicrobial features that keep the house in a good hygienic state, helping to prevent diseases and infections.
Additionally, this spray foam can be used to unite plastic, woods, metals and concrete bricks. Also, the weight of the device is less than 16lbs, making it portable for easy carriage.
Various sizes of openings in the house can be sealed with this foam. The sealing prevents penetration of air thus, creating an effective air barrier. It also helps keep insects and rodents away from the building.
This also has antimicrobial features that keep the house in a good hygienic state, helping to prevent diseases and infections.
Additionally, this spray foam can be used to unite plastic, woods, metals and concrete bricks. Also, the weight of the device is less than 16lbs, making it portable for easy carriage.
Convenience Products: Touch N Seal 4004520015
This is a do-it-yourself spray foam kit for insulation. It also serves as a multipurpose kit that helps to reduce house temperature. It is also built in such a way that it maintains the room temperature in either season-winter or summer.
This product has two compartments that offer a high level of efficiency and can withstand any harsh conditions. With a high-performance spray gun, it fits every user perfectly, as it sprays effectively and precisely.
This device has an eco-friendly sealer with sealing property that is advanced and airtight. Also, this spray foam is designed to be lightweight making it easy to carry around. It is note-worthy that the drying time of this spray foam is an astonishing 1 minute!
This product has two compartments that offer a high level of efficiency and can withstand any harsh conditions. With a high-performance spray gun, it fits every user perfectly, as it sprays effectively and precisely.
This device has an eco-friendly sealer with sealing property that is advanced and airtight. Also, this spray foam is designed to be lightweight making it easy to carry around. It is note-worthy that the drying time of this spray foam is an astonishing 1 minute!
Removing Spray Foam Insulation
When the clothing is wet is the best time to remove the spray foam stain. Scrub the affected area with a rag to remove the spray foam from the cloth. After that, add acetone to the rag and scrub it against the fabric. Follow these processes and wash the cloth with a stain remover.
If the spray foam insulation stain has hardened on the cloth, try breaking it down by removing tiny pieces from it until it has considerably been eliminated, then use acetone, as instructed above.
If the spray foam insulation stain has hardened on the cloth, try breaking it down by removing tiny pieces from it until it has considerably been eliminated, then use acetone, as instructed above.
Removing Spray Foam Insulation on the skin
Of all the parts of the body, the hands are the most common parts where the spray foam can get attached to. It might interest you to know that it is easier for you to remove when it is still wet— just like removing stains from clothes with washing. Removal from the skin is considerably similar to removal from clothes, but with extra treatment or substance, added to the hand stain removal.
Once it's time to get off the spray foam from the skin, start by wiping the skin with a cotton material, either with a towel, a rag, or a wet foam. Then, include acetone in your wiping rag or towel, before gently rubbing it on the stained areas. After this process, moisturize your skin with lotion to keep it hydrated. By doing these, the spray foam stain will be removed from the skin. But if the stain is hardened, it becomes more challenging to get off the skin. If that is the case, use a pumice stone to scrub the dried spray foam on the skin, until there's no sign of it left. Apply some petroleum jelly on the affected area and cover it to allow the petroleum jelly soak the skin. The airtight material should be removed after 60 minutes, then the skin washed with soap and water. After the completion of this process, the affected area should be rid of spray foam.
Once it's time to get off the spray foam from the skin, start by wiping the skin with a cotton material, either with a towel, a rag, or a wet foam. Then, include acetone in your wiping rag or towel, before gently rubbing it on the stained areas. After this process, moisturize your skin with lotion to keep it hydrated. By doing these, the spray foam stain will be removed from the skin. But if the stain is hardened, it becomes more challenging to get off the skin. If that is the case, use a pumice stone to scrub the dried spray foam on the skin, until there's no sign of it left. Apply some petroleum jelly on the affected area and cover it to allow the petroleum jelly soak the skin. The airtight material should be removed after 60 minutes, then the skin washed with soap and water. After the completion of this process, the affected area should be rid of spray foam.
Removing Spray Foam from the cloth
When the clothing is wet is the best time to remove the spray foam stain. Scrub the affected area with a rag to remove the spray foam from the cloth. After that, add acetone to the rag and scrub it against the fabric. Follow these processes and wash the cloth with a stain remover.
If the spray foam insulation stain has hardened on the cloth, try breaking it down by removing tiny pieces from it until it has considerably been eliminated, then use acetone, as instructed above.
If the spray foam insulation stain has hardened on the cloth, try breaking it down by removing tiny pieces from it until it has considerably been eliminated, then use acetone, as instructed above.
Removing Spray Foam Insulation from construction materials
Removing spray foam from construction materials is a lot easier when it has dried up totally. Start by using a hammer, saw or any item to cut out or break the spray foam into pieces. The remaining spray foam insulation should be scratched with a brush till you hit the brick or wood, depending on the material from which it is to be removed.
In order to remove the last trace of the spray foam insulation, add some lacquer to a foam or rag, then scrub it on the surface it was installed on to remove all traces. It is advisable not to use water to remove spray foam insulation, as it would make it harder, hence making it difficult to remove.
In order to remove the last trace of the spray foam insulation, add some lacquer to a foam or rag, then scrub it on the surface it was installed on to remove all traces. It is advisable not to use water to remove spray foam insulation, as it would make it harder, hence making it difficult to remove.